Glycol Antifreeze and Engine Coolant
AMSOIL Antifreeze & Coolant is newly
formulated to provide benefits far beyond those found
in today's conventional antifreeze and coolant products.
This revolutionary formulation provides maximum antifreeze
and cooling protection in the most extreme temperatures
and operating conditions. And unlike conventional
ethylene glycol based products, which are highly toxic
and even fatal, AMSOIL Antifreeze & Coolant is
formulated with propylene glycol. It is biodegradable
and requires no special disposal costs or procedures
in most areas. Above all, its low toxicity presents
no threat to children, pets or wildlife.
Now, AMSOIL Antifreeze & Coolant
provides even greater benefits:
AMSOIL Antifreeze & Coolant contains
a proprietary poly organic acid technology. It eliminates
the need for periodic changing or recharging of cooling
systems. There is no need for supplemental coolant
additives. AMSOIL Antifreeze & Coolant provides
extended service life in all gasoline and diesel vehicles.
It can be used for seven years or 250,000 miles in
passenger cars, light-duty trucks, vans and recreational
vehicles. It lasts seven years or 750,000 miles in
over-the-road diesel trucks.
Compatible With Other Fluids
AMSOIL Antifreeze & Coolant is dyed
neutral yellow and is compatible with all ethylene
and propylene antifreeze and coolant formulations
on the market, including DEX-Cool®, Sierra®, and Zerex®.
It is also compatible with fully formulated diesel
antifreezes and other organic acid technology (OAT)
and hybrid organic acid technology (HOAT) formulations.
AMSOIL Antifreeze & Coolant adheres
to metal. It self-seals hairline cracks in welds and
seams to prevent leaks, without additional stop-leak
products or fibrous materials.
Prevents Metallic Corrosion
Independent tests reveal AMSOIL Antifreeze
& Coolant surpassed standards for metallic corrosion.
It plates to metal to protect even when exposed to
acids and salt spray. Standard allowances for loss
in aluminum and solder are less than 60 mg. AMSOIL
Antifreeze & Coolant lost 0 mg in aluminum and
less than 6 mg in solder.
Standard for iron, steel, copper and
brass allow a maximum loss of less than 20 mg. AMSOIL
Antifreeze and Engine Coolant never exceeded 3 mg
loss in any of those metals in a testing period that
was run for 10 weeks, three weeks longer than required